News

Weather’s Effects on Outdoor Wireless Systems

Posted on Fri, Nov 07, 2014

Outdoor wireless systems that are properly engineered and designed can provide 99.999% predictable uptime reliability. When wireless backhaul networks are designed factors like path loss, Fresnel Zones, and weather are calculated to provide an accurate determination of which frequency is to be used, antenna output gain, transmit power of the radios, antenna heights, and modulations.

Properly designed systems use the correct antennas, frequencies, and transmit power to overcome the Path Loss and account for weather conditions to get the desired Receive Signal Level ("RSL" measured in dBm). Radios are designed to operate with a certain level of "Fade Margin" that allows the system to operate at a predictable reliability (for most systems 20 to 25dB of Fade Margin is recommended).

Wireless backhaul, whether you are talking about wireless mesh, WiMax, point to multipont wireless, or point to point wireless backhaul, systems can function with extreme reliability and predictability if installed correctly. Proper installation is a critical component of the success and longevity of an outdoor wireless system. One of most important parts of the installation process is performing quality weather proofing of all components.

Weatherproofing gets overlooked all the time. When a system is working a broadband wireless network gets forgotten about and really inspected. Weatherproofing doesn’t last forever and needs to be inspected annually and should be replaced if any deficiencies are found. All cable connections, whether at the termination of the radio, at the lighting surge arrestors, or at any other junctions.  

 Wireless Weatherproofing

Proper weatherproofing is done using butyl tape and high quality polyurethane UV resistant tape. Good practice is to apply tape first, then apply butyl (which prevents any moisture to get through), and then an outer layer of tape. Tape should be wrapped in an overlapping shingling fashion. Over time though even though resistant to UV, tape can loose its adhesive and peel away. Annual inspection and re-taping should be performed.

One of the most difficult problems to troubleshoot on an outdoor wireless backhaul system is failure due to moisture in a connection or water that gets in a cable. Many times this issue cannot be easily visible on a surface inspection. The best way to avoid issues caused by weather is to maintain proper weatherproofing from the beginning.  

Properly maintained outdoor wireless bridge systems should remain functioning as originally designed and specified. By performing periodic maintenance and re-certification a properly designed and installed system should perform exactly as it did on the original install date.

Tags: AO Wireless, Alpha Omega Wireless, Wireless Industry, Wireless 101, Wireless Installation

Alpha Omega Wireless Awarded Tips/Taps Contract

Posted on Fri, Apr 06, 2012

Alpha Omega Wireless has been accepted as a pre-approved vendor under the Tips/Taps purchasing contract. AO Wireless has been awarded this contract to provide wireless backhaul solutions and wireless installation to educational, city, county and state agencies.

Originated in 2002, The Interlocal Purchasing System (TIPS/TAPS), is a purchasing cooperative created to serve public and private school districts, colleges and universities, federal, state, county and city municipalities. 

Tips Taps Texas

The PURPOSE of the TIPS/TAPS Program is to provide substantial savings and best value for participating educational entities or public agencies through cooperative purchasing practices

All awarded contracts through the TIPS/TAPS program have been Awarded under the Competitively Bid Process and received a Contract from TIPS/TAPS Governing Board of Directors. These Awarded Vendors have agreed to provide the best pricing, terms and conditions available to TIPS/TAPS Members.

The TIPS/TAPS Program takes PRIDE in providing a purchasing coop where Awarded Vendors and Members both benefit. With a successful award, a vendor can expedite an order for a member because all purchasing requirements are completed during the RFP process. A school district or other TIPS/TAPS Member can benefit from the cost savings of time and expense in competitively bidding each purchase.

President Joe Wargo says, "Having a procurement vehicle like TIPS/TAPS in place will greatly benefit our education and government clients. Anything that can streamline their processes and help them stay in compliance is a great value add. Plus they can be reassured that they are being given the best pre-negotiated pricing.

About TIPS/TAPS
The Interlocal Purchasing System (TIPS/TAPS), a purchasing cooperative created to serve public and private school districts, colleges and universities, federal, state, county and city municipalities. Originated in 2002 by the Region 8 Education Service Center in Mount Pleasant, Texas.

About Alpha Omega Wireless, Inc.
Alpha Omega Wireless, Inc. ("AO Wireless") is a leading integrator of complete end-to-end wireless backhaul networking technology and solutions. Alpha Omega Wireless provides wireless site surveys, feasibility studies, engineering, spectrum analysis, path calculations, design, wireless installation, equipment sales, radio repair and maintenance, support, troubleshooting, and ongoing management & monitoring of point to point wireless links, point to multipoint wireless systems, WiMax backhaul, and wireless mesh. As well as SCADA telemetry radio, wireless video surveillance, and indoor RF. Alpha Omega Wireless works with unlicensed wireless Ethernet bridges and licensed microwave links.

Tags: Alpha Omega Wireless, Wireless Industry, General, Wireless 101